| |
SSW770-SPC  | | SPC Graphs and Analysis software module makes it easy for operators to enter a simple selection criteria and to receive bright, color SPC Graphs.
|
| 
S.E.A.M.scan Module - SPC Analysis is an add-on to the S.E.A.M.scan Inspection Software for Double Seam Data Collection and Reports.
Collecting accurate Can Measurement and Double Seam Inspection data is important, but getting it into the right format for analysis is critical. S.E.A.M.scan Module - SPC Analysis makes it easy for operators to enter a simple selection criteria and to receive bright, color SPC Graphs.
Out-of-spec readings are highlighted in red, and a mouse-click on any point brings up the actual inspection report (including the Double Seam Images if used with the S.E.A.M.scan Module - Image Maintenance).
S.E.A.M.scan Module - SPC Analysis features:
- X Bar and R Graphs (Average and Range)
· Including: Target, Min and Max Specifications, Min and Max Control Limits,
Missing Data Points, and Highlighted Out-of-Spec Points.
- Histograms
- Select Data by: Date, Time, Shift, Line, Head, Specification, Product, User and Measurement
- Drill Down - Click on Any Data Point for Inspection Date Time and Reports
- Pre-Set or Calculated Control Limits
- Statistical Information
· Including: Minimum, Maximum, Average, Range, % Within Spec,
Standard Deviation, Cp and CpK
The S.E.A.M.scan Module - Image Maintenance seamlessly integrates with the S.E.A.M.scan Inspection Software, S.E.A.M.scan Module - Image Maintenance, and S.E.A.M.scan Module - FDA Edition software components.
Minimum Requirement: S.E.A.M.scan Inspection Software
|
|
|
|
|
